01
Connect
EaseLink reads from your current Wi-Fi access points and people-counting sensors. Aruba, Cisco, Sophos, Ruckus, TP-Link APs, plus Milesight and Xovis 3D/ToF sensors.
EaseLink
Use the hardwares you already own
EaseLink turns the Wi-Fi access points and existing people-counting sensors you already operate into Ariadne's crowd analytics platform. It integrates with Aruba, Cisco, Sophos, Ruckus, and TP-Link Wi-Fi APs plus 3D and Time-of-Flight people-counting sensors from Milesight, Xovis, and others, then feeds the Hybrid Fusion data layer into the same dashboard new-sensor deployments use. No new hardware, no rip-and-replace.
Works with
How it works
Four steps to live data
EaseLink reads from your existing infrastructure and pipes the events into the Ariadne platform. The dashboard is the same one new-sensor deployments get.
02
Fuse
Existing data streams flow through Hybrid Fusion's processing layer for occupancy, dwell, and trajectory analytics.
03
Visualise
Live dashboard with footfall, journeys, dwell, and queue alerts. Same dashboard as new-sensor deployments.
04
Scale
Add more venues or sensor types over time without re-deploying. EaseLink scales with your infrastructure.
Why EaseLink
Reuse what you already own
Three things EaseLink consistently delivers over greenfield deployments.
Lower TCO
No new sensor purchase. EaseLink uses your existing Wi-Fi APs and people-counting sensors, cutting deployment cost and time.
Faster live data
Days, not weeks, to first live data. No installation visits, no cabling, no new hardware on site.
Privacy-first by default
Same identifier-free architecture as new-sensor deployments. GDPR-native, EU AI Act ready.
Setup
Set up EaseLink today
EaseLink runs on your existing hardware. No new sensors, no firewall rewrites. Verified architecture for Aruba, Cisco, Sophos, and Ruckus access points.
Use your hardware
EaseLink reads from the access points you already own. No firmware changes, no rip-and-replace.
Lightweight on-prem
One or two small Linux devices on the LAN. Ariadne ships them, or you bring your own.
Outbound only
TLS-encrypted MQTT to the Ariadne cloud. Zero inbound ports. WireGuard remote access stays disabled by default.
Privacy
What EaseLink captures, and what stays out
EaseLink minimizes what crosses the privacy line. Probe-request metadata is enough to estimate footfall. Everything else stays in the AP, encrypted and ignored.
What EaseLink reads
- Probe-request signal strength (RSSI)
- Timestamp of the probe
- Identifier of the AP that received it
What stays in the AP
- Packet payloads (data carried inside Wi-Fi packets)
- Personal data of any kind
- Persistent local storage; in-memory processing only
- Inbound network access; zero open ports
- Encrypted wireless traffic; WPA2 and WPA3 stay sealed
Compatibility
Supported devices
EaseLink works with industry-standard Wi-Fi APs and 3D/ToF people-counting sensors. Search the table for your device. New device support is added regularly.
381 of 381 devices evaluated for crowd analytics
| HPE Aruba | AP-735 | Wi-Fi 7 | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-754 | Wi-Fi 7 | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-755 | Wi-Fi 7 | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-635 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-655 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-605H | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Hospitality | Verified |
| HPE Aruba | AP-615 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| HPE Aruba | AP-515 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Indoor | Verified |
| HPE Aruba | AP-518 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Outdoor | Verified |
| HPE Aruba | AP-535 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Indoor | Verified |
| HPE Aruba | AP-555 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Indoor | Verified |
| HPE Aruba | AP-675 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Outdoor | Verified |
| HPE Aruba | AP-677 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Outdoor | Verified |
| HPE Aruba | AP-679 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Outdoor | Verified |
| HPE Aruba | AP-565 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Outdoor | Verified |
| HPE Aruba | AP-567 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Outdoor | Verified |
| HPE Aruba | AP22 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Indoor | Verified |
| HPE Aruba | AP25 | Wi-Fi 6 | 2.4 GHz, 5 GHz | Indoor | Verified |
| HPE Aruba | AP32 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| Cisco | C9162I | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| Cisco | C9164I | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| Cisco | C9166I | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| Cisco | CW9166D1 | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
| Cisco | CW9163E | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Outdoor | Verified |
| Cisco | C9136I | Wi-Fi 6E | 2.4 GHz, 5 GHz, 6 GHz | Indoor | Verified |
Verified means the AP family has a published EaseLink integration architecture. Compatible devices support standards-based packet capture; per-deployment verification is part of onboarding.
Showing 1–25 of 381
Page 1 of 16
Don't see your device?
Send us your hardware list and our team will check compatibility within one business day.
Get started
Ready to set up EaseLink?
Two questions, twenty minutes, a tailored walkthrough of your venue's existing infrastructure and what EaseLink can read from it.
Talk to us
Two questions, twenty minutes, a real walkthrough of your venue's footfall.
What to expect
- 20-minute screen share, walked through on your venue map
- Live walkthrough of Hybrid Fusion sensor outputs
- Where Ariadne fits, and where it doesn't
Got a different question?
Send us a message
Anything that isn't a sales conversation. We'll route it to the right person and get back within one business day.